Self Regulating Heating Cable for Snow Melt on The Road
Category: Self-regulating & Constant watt heating cable  Publish Time: 2015-07-14 15:58 
Self Regulating Heating Cable for Snow Melt on The Road
Self Regulating Heating Cable for Snow Melt on The Road

Product Description

Self Regulating Heating Cable for Snow Melt on The Road
thermal oil heater preterminated heat tracing cable self regulating heating cable for snow melt on the road
Water lines and process pipe systems can become a real problem when temperatures drop below freezing. It's only when the thaw comes that you realize the damage a split or cracked water pipe can cause.Water Pipe Heating Cable provides a reliable heating solution to the problem of frozen pipe,it can prevent frost damages and keep liquids floating at all outside temperatures.
The self regulating heating cable is widely used for pipe/tank freeze protection, such as water pipe, solar water heater pipe, oil pipe, downspout.
For roof snow melting
Soil warming for plants
Floor heating and other heating applications.
 Self Regulating Heating Cable for Snow Melt on The Road
Cable Structure:
·        1. Copper-core wire:  7×0.50
·        2. Conductive heating element
·        3. HD polyolefin inner insulation
·        4. Metal braid explosion proof
·        5. HD polyolefin outer jacket
·        first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
·        if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
·        afterwards you can pass the cable.
·        the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
·        the heating cable can not be passed behind walls
·        put the thermostat (if need) with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
·        finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
·        attention: the cable must be fastening straight on the pipe
·        now you can check if your cable works.
·        afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
·        in general the heating cable must be protected against mechanical damage or biting.
·        the heating cable can not be put into liquids.
·        finally plug the cable into a 230V/120V main plug
·        Outerjacket standard color: black
·        Max. working temperature: 65C degree
·        Max. exposure temperature: 70C degree
·        Max. working length: 100M
·        Min. installation temperature: -40C degree
·        Voltage: 120V/240V type optional
·        Power: 15~35w/m optional
·        Start-up current(@)10C): ≤0.6A/m
·        Min. bend radius: @20C:25.4mm  @-30C:35.0m